Common problems of LED display maintenance

    With the development of science and technology and the continuous improvement of the technology of LED display manufacturers, the service life of LED display has been greatly improved and extended. However, no matter how good the quality of electronic products is, they cannot be maintained. Many customers did not really understand the relevant operation and use precautions of LED display manufacturers, which ultimately led to the life of LED display greatly shortened. Henan Liyade is here to explain in detail the maintenance problems during the use of LED display.

1、 LED display switch problem

We should turn on the screen first and then turn off the screen. If we turn off the computer first and do not turn off the LED display screen, the whole screen will appear bright spots, which will lead to the danger of burning the lamp tubes. The consequences of burning the lamp tubes are serious. We can't switch on and off the machine continuously. The time interval between switching on and off the screen should be more than five minutes. In addition, we should avoid switching on the screen in the state of full white screen. Therefore, the impact current of the system is the largest at this time. If the ambient temperature is too high or the heat dissipation condition is not good, we should not switch on the screen for a long time. If our LED display screen often trips the power switch, At this time, we need to check the screen body and replace the power switch to ensure normal use. We should regularly check the firmness of the hanging part. If looseness occurs, we should re reinforce or update the hanging parts.

2、 Precautions for changes and changes of LED display manufacturer's control system

The zero and fire of the power lines of the computer and control parts shall not be connected reversely, and shall be connected in strict accordance with the original position. If there are peripherals, test whether the cabinet is charged after connection.When moving computer and other control equipment, check whether the connecting wire and control board are loose before power on.It is not allowed to change the position and length of the communication line and flat connecting line at will.In case of short circuit, tripping, wire burning, smoke and other abnormal phenomena after moving, power on test shall not be repeated, and problems shall be found in time.

    LED display not only enriches people's cultural life experience, but more importantly, it promotes the improvement of the city's image. The industry of LED display manufacturers is developing so rapidly that we should fundamentally understand and understand it more thoroughly. When using LED display, we should pay more attention to maintenance and prolong its life.

• Year Established
  --
• Business Type
  --
• Country / Region
  --
• Main Industry
  --
• Main Products
  --
• Enterprise Legal Person
  --
• Total Employees
  --
• Annual Output Value
  --
• Export Market
  --
• Cooperated Customers
  --