Analysis of the installation structure of outdoor and indoor LED large screens

Analysis of the installation structure of outdoor and indoor LED large screens. LED large screens are currently one of the most commonly used devices in the display field. They can be as small as conference rooms and video surveillance, as large as airport terminals or even gymnasiums. Strong application ability. Many people will ask how to transport and install such a large machine and equipment. Here, United Huiye Technology (www.xspled.com) will introduce in detail how to transport and install large LED screens. LED large screens are divided into two types: indoor and outdoor. Indoor LED large screens are much simpler. They can be designed and assembled with box structure or magnetic suction on the front of the LED module. Both have their own advantages and disadvantages. The advantage of the magnetic structure is that the transportation cost is low. , and it can be maintained from the front. If the LED large screen needs to be repaired later, as long as the front LED module is removed, the power supply and control card can be easily taken out. After maintenance is possible, because the LED module is fixed by screws at the back, the module can only be taken out by removing the screws from the back of the LED screen.

The outdoor LED large screen is relatively more complicated. Due to the wind and rain, the waterproof feature must be considered. Therefore, the outdoor LED large screen can only be locked with screws, and a waterproof rubber pad should be installed between the module and the box. risk of rainwater ingress. After understanding the structural characteristics of outdoor and indoor LED large screens, you can know the packaging, transportation and installation methods of LED large screens. Most of the indoor LED large screens are packed in cartons. The LED modules are protected with pearl cotton and shockproof materials and then packed into cartons for transportation. If a box structure is used, the size of the box is designed according to the control unit to make a large LED screen. The smallest unit can be packaged with cardboard.

There is no doubt that the outdoor LED large screen can only use the box structure, and the packaging method is the same as the indoor box structure. It is worth noting that if the box structure is relatively close, it can be transported by chartered car. If it is to be sent to a remote area, it must be packed in a wooden frame or wooden box to prevent collision and crushing. If the LED screen needs to be exported, it is usually packed in a flight case or paper tray.

The above is the introduction of knowledge about the structure, packaging and transportation of outdoor and indoor LED large screens. I hope it can help you. .