Conventional installation method of LED full color screen

? LED full-color screen is now the mainstream development direction of LED display. Monochrome LED display is on the verge of being eliminated. Because full-color LED display can display text in different colors, graphics, pictures, and video advertisements can be vividly displayed. Reflect, give merchants and audiences a new visual experience. Below we will share with you several ways of installing conventional LED full-color screens, which can provide you with reasonable reference. 1. Hoisting type, suitable for LED screens with a total weight of less than 50kg and a small area, which can be directly hung on the load-bearing wall. Standard hangers can be used for the indoor load-bearing concrete roof, and the length of the hanger depends on the site conditions. The indoor steel beams are hoisted by steel wire ropes, and the jacket is decorated with steel pipes in the same color as the screen body. 2. Inlaid type, the inlaid structure is to open a hole in the wall, and the wall is all inlaid in the wall. It adopts front maintenance, and the display LED unit board is pasted on the frame structure with strong magnetic materials. It is required that the size of the opening should be consistent with the size of the display frame, and should be properly decorated. In order to facilitate maintenance, the opening on the wall must be connected, otherwise a front disassembly mechanism must be used. Embedded installation is not conducive to the heat dissipation of the screen. 3. Mounting on the front flip cover, suitable for display screens with a weight greater than 50kg and a height and width of the LED screen body greater than 1200mm. It must be installed on a load-bearing wall. Because of its large area, it is difficult to disassemble and assemble, so through the front flip of the screen body Solve maintenance space. 4. Ordinary hanging installation, suitable for display screens with a total weight of less than 50kg. It can be directly hung on the load-bearing wall without leaving room for maintenance. 5. The swing arm installation is mainly for the convenience of maintenance on the back of the screen and heat dissipation of the screen. The swing arm installation needs to design the frame structure according to the screen area, weight and other parameters. The swing wall can be designed to be movable or fixed. 6. The floor-standing installation is divided into two types: fixed and movable. The movable installation with rollers is suitable for led displays with small area and light weight. 7. For the outer frame of indoor LED full-color screens, there are usually three methods: aluminum alloy outsourcing, brown aluminum alloy, stainless steel and wreath metal integration. Among them, the aluminum alloy outsourcing stainless steel frame adopts brushed stainless steel, which is beautiful and generous; the brown aluminum alloy outer frame has a simple structure, and the color of the outer frame is close to the background color of the display screen; In addition, the overall structure is relatively compact without gaps. Its disadvantage is that it has requirements for the size of the LED full-color screen. Through a brief introduction, I hope everyone can understand the installation method of indoor LED full-color screens, and get some tips and help about the installation of indoor LED screens. .