Do you know several ways to install the stage led display

There are many ways to install stage LED displays, among which hoisting, mosaic installation, wall hanging, and truss installation are more common. If the stage is fixed, you can use the mosaic installation method. It is recommended to use the truss installation method. If there is a wall behind the stage, it is the best installation method to hang the LED display on the wall. Installation method of LED screen for opening ceremony planning: wall-mounted installation for opening ceremony planning 1. This installation method is mainly used for indoor and semi-outdoor. 2. It is generally used for the entrance of passages and corridors, as well as the entrances of stations, railway stations, and subways.

3. It is used to guide the traffic of highways, railways and highways. 4. The design of the screen generally adopts the design of an integrated cabinet, or the design of the hoisting structure. Inlaid installation for the planning of the opening ceremony 1. The entire stage LED display is embedded in the wall, and the display plane and the wall are on the same level. 2. Generally use simple box design 3. Pre-select front protection (front protection design) 4. This installation method is used indoors and outdoors, but generally uses a screen with a small distance and a small area.

5. It is generally used for building entrances, halls and other opening ceremonies. There are many ways to install the column device in the column type, and it is generally used as a billboard in the wild: 1. Single-column device method: suitable for small screen applications 2. Double-column device method: applicable 3. Closed protection channel: suitable for simple boxes 4. Open protection channel: suitable for standard box opening ceremony planning hanging installation 1. The indoor led display device is generally used indoors or semi-outdoor. 2. The display area of ​​the screen is small, and generally does not leave the repair channel space. The entire screen is removed for maintenance, and may be made into a foldable integrated structure. 3. The screen area is slightly larger. Generally, pre-protection planning (that is, frontal protection planning, assembly method) is adopted.

The installation of the roof-mounted device is planned for the opening ceremony 1. The key to this device is that the display screen and the steel frame structure can resist the wind. 2. Generally, the oblique point device is used, or the module is designed with an oblique 8° plan. 3. It is mainly used for outdoor advertising, opening ceremony planning, renting, hoisting and installation of lifting screens, which should not have a larger size. The general requirement is less than 6m*10m.

Materials and curtains for special boxes are excluded. The top is fitted with a suspension beam and the bottom is fitted with a bottom beam. This girder is used to lift the screen.

Between the row and the row box, it is connected with the hoisting organization, and the locks between the horizontal boxes are fastened. Key points of hoisting organization: gear type, cone type, bolt type. It has the following different characteristics: 1. The gear type of led display in the banquet hall is more expensive and more beautiful.

2. The cone type is moderately priced and reliable. 3. The bolt type is cheap and reliable. It is very troublesome to disassemble and assemble.

.