Interpretation of the conventional method of LED screen installation

In order to allow friends who need to make LED screens to quickly choose the installation method that suits them, Shenzhen Lianhui Technology provides six ways for LED screen installation in different environments. First of all, according to the different requirements of each project, such as the choice of pixels, resolution, price, playback content, display life, and front or rear maintenance, there will be different trade-offs; of course Also consider the load-bearing capacity of the installation site, the brightness around the installation site, the audience's viewing distance and viewing angle, the weather and climate conditions of the installation site, whether it is rainproof, whether it is ventilated and heat-dissipating, and other external conditions. In addition, another very important aspect of buying LED screens is the design of the appearance shape. At present, LED screens can be customized according to the design and shape of buildings, such as the LED screens used by United Huiye Technology in many theaters and TV stations. , is to apply the LED display technology to the extreme, in order to achieve an extremely perfect visual effect. Furthermore, you need to pay attention to the fire safety level of the installation site, the energy-saving standards of the project, etc.; of course, when choosing, brand factors, LED screen quality, product after-sales service and other aspects are all important factors to consider. The requirements of each project are different, such as the choice of pixel, resolution, price, playback content, display life, and front or rear maintenance, etc., there will be different trade-offs; of course, the load-bearing capacity of the installation site must also be considered , the brightness around the installation site, the viewing distance and viewing angle of the audience, the weather and climate conditions of the installation site, whether it is rainproof, whether it is ventilated and heat dissipation, and other external conditions. In addition, another important aspect of buying LED screens is the design of the appearance and shape. At present, LED screens can be customized according to the design and shape of the building. Furthermore, you need to pay attention to the fire safety level of the installation site, the energy-saving standards of the project, etc.; of course, when choosing, brand factors, LED screen quality, product after-sales service, etc. are all important factors that need to be considered. Six installation methods for LED screens 1. Column installation: It is mostly used for the installation of outdoor advertising LED screens, where the field of view is wide and the surrounding area is relatively open, such as squares, parking lots, etc. According to the size of the screen body, it can be divided into single column and double column installation. The column mount is suitable for the installation of the LED screen on the open space, and the outdoor screen is installed on the column. In addition to the steel structure of the screen, the column type also needs to produce concrete or steel columns, mainly considering the geological conditions of the foundation. 2. Stacking: A concrete structure is used to build a wall sufficient to support the entire LED screen on the ground, and a steel structure is built on the wall to install the display screen. The steel structure reserves 800mm of maintenance space for placing related equipment and maintenance facilities. 3. Mosaic installation: indoors, it is suitable for indoor screens with a small area. Due to the small installation space, in order not to take up space, dig out the same size area on the wall according to the size of the screen, and embed the LED screen into the wall. The walls are required to be solid walls. The cost of using the front maintenance method is relatively high. For outdoor installation, the inlaid structure is suitable for the display screen project that has been included in the planning and design of the building. The installation space of the display screen is reserved in advance during the construction of the civil engineering project. Embedded in the wall of the building, there is enough maintenance space on the back. 4. Hanging installation: It is mostly suitable for large-scale places such as station LED screens and airport LED screens to play the role of indicator signs. The screen area is required to be small. (Below 10 square meters) It is required to have a suitable installation location, such as a beam or lintel on the top, and the screen body generally needs to be covered with a back cover. Ordinary mounting is suitable for single-box display screens with a total weight of less than 50kg. It can be hung directly on the load-bearing wall without reserving maintenance space. The display cabinet adopts a front maintenance design, and the display screen is lifted from the bottom during maintenance. That's it. Rack mounting is suitable for general outdoor display screens. Considering the difficulty of display screen maintenance, steel structure support is used between the screen body and the wall, and 800mm maintenance space is reserved. The space is equipped with maintenance facilities such as horse tracks and ladders. And install power distribution cabinets, air conditioners, axial fans, lighting and other auxiliary equipment. 5. Wall-mounted installation: it is mostly suitable for the installation of indoor LED screens. Hollow bricks or simple partition walls are not suitable for this installation method. 6. Roof-mounted installation: It is mainly suitable for outdoor advertising LED screens. The installation location is mainly the roof of the building. As the height of the building increases, the level of wind protection to be considered also increases. .