LED curved screen solution

LED curved screens are special-shaped screens, and the cabinets required by special-shaped screens are specially customized. If the curvature of the special-shaped screen is not very large, ordinary LED modules can be used. If the curved LED display screen has a large curvature, then Requires special custom LED modules. LED curved screens are divided into full inner arc, full outer arc, semi-circular arc, right-angle arc, etc. The arc design is mainly based on the design aesthetics and the site building environment. One of the key factors is the size of the arc. Below we will explain according to several conventional curved screens: 1. If the radius of the arc is larger, make the cabinet into a vertical strip and splice and install it. 2. If the radius of the arc is smaller, you can make the LED display box into the arc you need. Pay attention to the flatness when splicing the LED modules, and then splice the box according to the geometric formula. The steel structure is based on Cabinet radian to design and manufacture. 3. If the radius of the arc is less than 0.5 meters, you can only make special unit modules, make the unit modules into vertical strips, and splice them together; 4. If the screen body does not need to be waterproof or used indoors, it can be directly The steel structure is made into a curved surface according to the angle, and the LED module can be fixed on the steel structure (curved processing is required when the LED module is spliced). For LED curved screens, it is also challenging, such as large seams, and the curvature of the screen body is not smooth, which cannot adapt to large-curvature occasions. Vertical single-row modules to achieve better surface smoothness. The following is a picture of the structural design: .