Outdoor LED large screens are installed in different ways in different environments

The installation requirements of outdoor large LED screens are much higher than those indoors. They can be installed on the wall, hoisted or mounted on columns. Larger outdoor LED large screens usually have a thickness of about 80 cm. Maintenance channels are reserved behind the screen body, but the area is small The LED large screen is not high from the ground, and usually adopts the method of front maintenance, so the structure does not need to be too thick. Usually small LED large screens can be realized by the simplest and lowest cost installation scheme, that is, directly install the LED large screen box body against the wall, and the thickness is only about 9-20 cm. This method has two key points It needs to be confirmed whether there is an eave to cover the top of the first large LED screen, and whether the rain will pour on the large LED screen when it rains. The top of the cabinet is fine, and the LED module can be directly removed during maintenance, and then it can be maintained from the front. If the large LED screen is directly exposed on the wall, it must be made with a front flip structure, just like the previous flip phone, which can be opened when in use and closed when not in use. For large LED screens, it is Open the front cover during maintenance. After the repair is completed, the front cover can be locked to play normally. This will save a lot of cost compared to building a steel structure, and the overall LED large screen does not need to be so thick, and it is beautiful and generous.

.