Pay attention to these points when installing outdoor led display

Although it is good to install the LED display at the intersection and the traffic is large, we should also pay attention to the brightness of the outdoor LED display. If the brightness is too high, it will make people feel very dazzling, and if the driver looks dazzled, it may cause traffic accidents. If the brightness is too low, the advertisement may not be seen clearly under sunlight, and the desired effect may not be achieved.

Therefore, the LED display at the intersection must pay attention to the brightness. It is best to automatically adjust the brightness according to the weather conditions, such as daytime, nighttime, rainy, cloudy and so on. When some customers buy LED display screens for the first time, they completely hand over the installation to the installation technician, and the installation technician only considers the safe installation of the LED display screen and checks the wiring.

After the software is installed and debugged, it is considered complete, and the customer's needs are rarely considered. Therefore, the customer must be on site during installation, and communicate with the technician in time if there is any requirement, because the two parties consider different factors from different angles. When installing an outdoor full-color LED display, heat dissipation, safety and other issues must be considered.

Outdoor led displays are generally exposed to the sun, especially in summer when the temperature is high and heat dissipation is difficult. Also take into account weather such as thunderstorms and strong winds. Finally, I would like to focus on the safety issue of LED display screens. No matter what you do, any product.

Safety comes first. LED advertising screens are electronic products, and electronic products are inseparable from electricity, so the safety of electricity use is particularly important. The first is the problem of short circuit. The internal wiring of the display must be properly handled. The second is heat dissipation. If the heat dissipation is not handled properly, the internal temperature of the display will be too high, which will cause burning.

Therefore, fireproof materials must be used during installation, and heat dissipation must be handled well. Avoid fire hazard. .