What are the ways to install LED advertising screens

What are the installation methods of LED advertising screens? Unlike TVs or projection equipment, LED advertising screens require many pieces of LED modules or cabinets to be spliced ​​together, and supporting equipment can fully play text, pictures and video programs. There is a waterproof difference between the indoor LED advertising screen and the outdoor series, so the indoor LED advertising screen is simpler than the outdoor LED advertising screen. The following Shenzhen United Huiye Technology (www.xspled.com) will talk to you about several common installations of LED advertising screens Way. The most common indoor LED advertising screen is wall-mounted installation. There are two types of wall-mounted installations, one is wall-mounted installation, and the other is that there is a maintenance channel behind or a pedestrian channel needs to be reserved behind the LED advertising screen. The thickness of the wall installation is only 90mm, and only wrapping around the LED screen is enough. If there are pedestrians walking behind, the overall thickness of the LED advertising screen is about 600-800mm, and the back also needs to be wrapped.

Outdoor LED advertising screens are much more complicated. First of all, there are many ways to install outdoor LED advertising screens. Wall hanging and column are the most common two, followed by hanging, hoisting, squatting, F pole type, bridge type, etc. . The cost of hanging on the wall is the lowest. Just fix the finished steel structure on the wall with chemical bolts, and wrap the edges around it. The most important thing is to find a load-bearing wall or steel beam. Columns are the most complicated in the installation process of outdoor LED advertising screens. Columns are also divided into double columns or single columns. A single column can meet the load-bearing requirements if the area is less than 60 square meters. Double columns are recommended for areas larger than 80 square meters. During the production process First of all, the foundation needs to be dug. The depth is determined according to the weight of the LED advertising screen and the upper steel structure. The middle column is connected with the flange of the foundation. The structure is basically the same, and the back of the different parts needs to be hemmed.

.