Enbon FC-B series
Aluminum Outdoor Fixed LED Display
Outdoor Advertising Digital Display Screen
2022 China New LED Display Screen Product
HD High Brightness Waterproof LED Display
Advertising Playing Equipment LED Video Wall Display Screen
┃ Product Description
Enbon FC-B series is a kind of LED display screen for outdoor fixed front and back service. High brightness for more than 6000nits, bringing full colorful images for audiences. The feature of energy saving brings less fee cost. Installation without wires decreases additional costs. Front maintenance has SMD and DIP modules, creating more possibilities for display installation, it not only has two cabinet installation types-fixed installation and Hanging, but also its cabinet maintenance has front and rear maintenance two ways. High advanced technology makes our product with efficient heart disspation.
┃ Product Parameters
Pixel Pitch | Outdoor: 4, 5.33, 6.67, 8, 10,16 |
LED lamp | Outdoor: P4=SMD2727 P5.33=SMD2727 P6.67=SMD2727 P8=SMD2727 P10=SMD2727 P16=SMD2727 |
Brightness | Outdoor:P4=6000nits P5.33=6000nits P6.67=6000nits P8=6000nits P10=6500nits P16=8500nits |
Module pixel | Outdoor:P4=80*80dots P5.33=60*60dots P6.67=48*48dots P8=40*40dots P10=32*32dots P16=20*20dot |
Cabinet pixel | Outdoor:P4=240*240dots P5.33=180*180dots P6.67=144*144dots P8=120*120dots P10=96*96dots P16=60*60dots |
Module size | Outdoor:P4=320*320mm P5.33=320*320mm P6.67=320*320mm P8=320*320mm P10=320*320mm P16=320*320mm |
Cabinet size | Outdoor:P4=960x960x120mm P5.33=960x960x120mm P6.67=960x960x120mm P8=960x960x120mm P10=960x960x120mm P16=960x960x120mm |
Module weight | Outdoor:P4=1.6kg P5.33=1.6kg P6.67=1.6kg P8=1.6kg P10=1.5kg P16=2kg |
Cabinet Weight | Outdoor:P4=30kg P5.33=30kg P6.67=30kg P8=30kg P10=30kg P16=32kg |
Storage Temperature | - 40 ℃ ~60 ℃ |
Operation Temperature | - 20 ℃ ~50℃ |
Storage Humidity | 10% ~ 90% |
Operation Humidity | 10% ~ 90% |
Gray scale | 14bits |
Gray Scale per Color | 16384level |
Refresh Rate | ≥1920Hz |
Max Power | Outdoor:P4=800w/sqm P5.33=850w/sqm P6.67=800w/sqm P8=850w/sqm P10=700w/sqm P16=400w/sqm |
Average Power | Outdoor:P4=300w/sqm P5.33=380w/sqm P6.67=300w/sqm P8=380w/sqm P10=240w/sqm P16=130w/sqm |
IP rating | Outdoor:IP54/IP65 |
Drive Mode | Outdoor:P4=1/10 P5.33=1/8 P6.67=1/5 P8=1/4 P10=1/2 P16=Static |
Viewing Angle | Outdoor:P4=140/140(H/V°) P5.33=140/140(H/V°) P6.67=140/140(H/V°) P8=140/140(H/V°) P10=140/140(H/V°) P16=110/60(H/V°) |
AC input voltage | AC 110/ 220V ± 10% |
AC input frequency | 60Hz |
Density | Outdoor:P4=62500dots/m2 P5.33=35344dots/m2 P6.67=22500dots/m2 P8=15625dots/m2 P10=10000dots/m2 P16=3096dots/m2 |
Cabinet Materie | Die-casting Aluminum |
┃ Product Display
┃ FAQ
Q : What method do you use to improve luminance and color uniformity?
A:The most important thing is to find out is what your screen manufacturer does to fix the inherent non-uniformity issues found in all LEDs. The method that yields the best results is the PWM correction method, and it often produces a screen that is cheaper than extreme binning methods, because the screen manufacturer does not need to purchase such tight binning lots from the LED manufacturers in order to achieve uniformity. Also, it enables the user to recalibrate the screen as the LEDs become dimmer over the course of several years.
Q : Are correction coefficients used for each pixel or only for each module?
A: For best results, correction coefficients should be provided for each pixel. Correction coefficients for the module can reduce or eliminate the patchwork quilt effect that shows modules with different brightness and color, but it cannot completely remove the boundary differences between different modules and will do nothing to eliminate the dirty window effect caused by pixel-to-pixel uniformity differences.
Q: How many correction coefficients are used for each pixel?
A: It is possible to produce correction only for luminance and white point. A screen of this type will use 3x1 correction coefficients (3 coefficients for each pixel). A full color corrected screen will use 3x3 coefficients (9 coefficients for each pixel).
Q: Are the PWM coefficients stored in the modules in addition to storing them in the video controller?
A:The coefficients need to be stored in the video controller in order to perform the video signal processing; however, it is also very convenient to store them in a type of flash memory on the module. This not only provides a backup for the coefficients, but it also enables the module to automatically update the coefficient database in the video controller when it is moved or replaced.
┃ Our Certification
Contact Us | Enbon
If you are interested in our products for large commercial display solutions, please contact us.
Our team will give you the best service thanks so many.
Feel Free | Contact Enbon
The first thing we do is meeting with our clients and talk through their goals on a future project.
During this meeting, feel free to communicate your ideas and ask lots of questions.
Recommended | Enbon
They are all manufactured according to the strictest international standards.
Our products have received favor from both domestic and foreign markets.
They are now widely exporting to 200 countries.