Indoor Fixed Installation LED Wall Display P2.5/P3 LED Indoor Advertising Display | Manufacturer from China | Enbon

Enbon FS-Plus series is a LED display screen uses for indoor staging, exhibitions, shopping malls and other social events. The weight of the box is 40% lighter than the traditional iron box, which saves a lot of costs. Anti-knock design to avoid damage to the module, reducing maintenance and improve work efficiency. High brightness and high contrast maintain the suction cup tool before use. The iron plate is installed on the back of the module and is easy to disassemble and assemble. Current sharing gives consistent power to panel, in case of any panel power supply failure. With bringhtness control that you could adjust brightness degree to the resultt you want.

┃ Ürün parametreleri

┃ Product Display

┃ Nakliye&Ambalajlama

┃ SSS

Q :What method do you use to improve luminance and color uniformity

A: The most important thing is to find out is what your screen manufacturer does to fix the inherent non-uniformity issues found in all LEDs. The method that yields the best results is the PWM correction method, and it often produces a screen that is cheaper than extreme binning methods, because the screen manufacturer does not need to purchase such tight binning lots from the LED manufacturers in order to achieve uniformity. Also, it enables the user to recalibrate the screen as the LEDs become dimmer over the course of several years.

Q: Are correction coefficients used for each pixel or only for each module?

A: For best results, correction coefficients should be provided for each pixel. Correction coefficients for the module can reduce or eliminate the patchwork quilt effect that shows modules with different brightness and color, but it cannot completely remove the boundary differences between different modules and will do nothing to eliminate the dirty window effect caused by pixel-to-pixel uniformity differences

Q: How many correction coefficients are used for each pixel?

A: It is possible to produce correction only for luminance and white point. A screen of this type will use 3x1 correction coefficients (3 coefficients for each pixel). A full color corrected screen will use 3x3 coefficients (9 coefficients for each pixel).

Q; PWM katsayıları, video denetleyicide saklanmasının yanı sıra modüllerde de saklanıyor mu?

A: Video sinyali işlemeyi gerçekleştirmek için katsayıların video denetleyicide saklanması gerekir; ancak bunları modül üzerinde bir tür flash bellekte saklamak da çok uygundur. Bu sadece katsayılar için bir yedekleme sağlamakla kalmaz, aynı zamanda modülün hareket ettiğinde veya değiştirildiğinde video denetleyicideki katsayı veri tabanını otomatik olarak güncellemesini sağlar.

• Kurulu yıl
  --
• İş Tipi
  --
• Ülke / Bölge
  --
• Ana sanayi
  --
• Ana Ürünler
  --
• Kurumsal Tüzel Kişi
  --
• bütün çalışanlar
  --
• Yıllık çıkış değeri
  --
• İhracat pazarı
  --
• İşbirliği yapan müşteriler
  --